Lumi-Link Command Center
This is the key to controlling your LUX above water lights and EOS Full Color Change underwater lights directly from your MFD, smart device…
This is the key to controlling your LUX above water lights and EOS Full Color Change underwater lights directly from your MFD, smart device and/or optional Lumishore STV 2204-i Display.
Simple to set up and use, owners can control the lights by zone and create lighting scenes to match any mood.
The Lumi-Link Command Center has an input for “triggers” allowing for programable lighting events personal to you.
Simply connect the Lumi-Link Command Center with a single plug-&-play cable, and smart control for your lighting fixtures will appear automatically. No other controllers or digital switches are necessary.
The Over-the-Air (OTA) feature allows software updates for new features and improvements, by connecting to a laptop or PC via Wi-Fi.
Required for all Lux above water lights and Full Color Change EOS Series lights (excl. SMX93).
- Supply Voltage Range:
- 10.5 - 31 V DC
- Max Current Draw 12/24V:
- 0.5 A
- MFD Compatibility:
- Selected Garmin, Raymarine, Simrad, B&G, Furuno models (check model compatibility before purchase)
- Reverse Polarity Protection:
- Load Dump Protection:
- Ingress Protection Rating:
- Zone Control:
- RGB Spectrum Color Select:
- White Colour Temperature Balance (Warm to Cold):
- Lumishore Preset Colors:
- Lights Synchronised:
- Color Cycle:
- Cycle Speed Adjust:
- Color Sweep:
- Color Sweep Speed Adjust:
- Color Pallette:
- Fixed Strobe:
- Strobe Mode:
- Light Discovery and Set up:
- Diagnostic Function:
- Sound to Light:
- Over the Air Firmware Updates:
- System Settings Backup and Restore:
The smartest way to control your Lumishore lights! This award-winning and unrivalled system was designed for ease of installation with a single plug-&-play cable configuration. It is the marine industry’s only plug-and-play module with pre-installed interfaces and lighting options straight out of the box.
What It Comes With
- One (1) Lumi-Link Command Center
- DMX Terminator (24-0087)
Controllers & Accessories
- Optional STV2204-i Display (60-0369)
Conversion cables to compatible MFD's (plug and play connect):
Simrad / B&G (60-0373)
- Lumi-Link Supra Bridge Furuno SD Card (60-0431)